8.4 Replace Cooling Fans and Circulation Fans
396 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
A - Front of drive
B - Insertion area
C - Tab
Figure 8.38 Reattach the Fan Finger Guard
5. Push the hook on the back side of the fan finger guard and click it into place on the drive.
Figure 8.39 Reattach the Fan Finger Guard
6. Energize the drive and set o4-03 = 0 [Fan Operation Time Setting = 0 h] to reset the cooling fan operation
time.
■ Remove a Circulation Fan
Remove the drive cover before you start this procedure.
CAUTION! Crush Hazard. Loosen the cover screws. Do not fully remove them. If you fully remove the cover screws, the terminal
cover can fall and cause moderate injury.
To Next Page
Loading...
