11.9 F: Options
524 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
No.
(Hex.)
Name Description
Default
(Range)
Ref.
F7-18
(03F6)
EtherNet/IP Current Scale
Factor
Sets the scaling factor for the output current monitor in the EtherNet/IP Class ID 2AH
Object.
0
(-15 - +15)
818
F7-19
(03F7)
EtherNet/IP Torque Scale
Factor
Sets the scaling factor for the torque monitor in the EtherNet/IP Class ID 2AH Object.
0
(-15 - +15)
818
F7-20
(03F8)
EtherNet/IP Power
Scaling Factor
Sets the scaling factor for the power monitor in the EtherNet/IP Class ID 2AH Object.
0
(-15 - +15)
818
F7-21
(03F9)
EtherNet/IP Voltage Scale
Factor
Sets the scaling factor for the voltage monitor in the EtherNet/IP Class ID 2AH Object.
0
(-15 - +15)
818
F7-22
(03FA)
EtherNet/IP Time Scaling
Sets the scaling factor for the time monitor in the EtherNet/IP Class ID 2AH Object.
0
(-15 - +15)
818
F7-23 - F7-27
(03FB - 03FF)
F7-28- F7-32
(0370 - 0374)
Dynamic Out Param 1 to
10 for CommCard
Sets Output Assembly 116. The drive writes the values from Output Assembly 116 to the
MEMOBUS/Modbus address register that is stored for each parameter. The drive will not
write the values from Output Assembly 116 to the registers when the MEMOBUS/Modbus
address is 0.
0 819
F7-33 - F7-42
(0375 - 037E)
Dynamic In Param 1 to
10 for CommCard
Sets Input Assembly 166. The drive sends the values from the MEMOBUS/Modbus
address registers stored for each parameter to Input Assembly 166. The drive returns the
default register value for the option card when the MEMOBUS/Modbus address is 0 and
the value sent to Input Assembly 166 is not defined.
0 819
F7-60
(0780)
PZD1 Write (Control
Word)
Sets the MEMOBUS/Modbus address for PZD1 (PPO output). PZD1 (PPO output)
functions as the STW when F7-60 = 0, 1, or 2.
0 819
F7-61
(0781)
PZD2 Write (Frequency
Reference)
Sets the MEMOBUS/Modbus address for PZD2 (PPO output). PZD2 (PPO output)
functions as the HSW when F7-61 = 0, 1, or 2.
0 819
F7-62
(0782)
PZD3 Write
Sets the MEMOBUS/Modbus address for PZD3 (PPO output). A value of 0, 1, or 2 will
disable the PZD3 (PPO output) write operation to the MEMOBUS/Modbus register.
0 819
F7-63
(0783)
PZD4 Write
Sets the MEMOBUS/Modbus address for PZD4 (PPO output). A value of 0, 1, or 2 will
disable the PZD4 (PPO output) write operation to the MEMOBUS/Modbus register.
0 819
F7-64
(0784)
PZD5 Write
Sets the MEMOBUS/Modbus address for PZD5 (PPO output). A value of 0, 1, or 2 will
disable the PZD5 (PPO output) write operation to the MEMOBUS/Modbus register.
0 819
F7-65
(0785)
PZD6 Write
Sets the MEMOBUS/Modbus address for PZD6 (PPO output). A value of 0, 1, or 2 will
disable the PZD6 (PPO output) write operation to the MEMOBUS/Modbus register.
0 820
F7-66
(0786)
PZD7 Write
Sets the MEMOBUS/Modbus address for PZD7 (PPO output). A value of 0, 1, or 2 will
disable the PZD7 (PPO output) write operation to the MEMOBUS/Modbus register.
0 820
F7-67
(0787)
PZD8 Write
Sets the MEMOBUS/Modbus address for PZD8 (PPO output). A value of 0, 1, or 2 will
disable the PZD8 (PPO output) write operation to the MEMOBUS/Modbus register.
0 820
F7-68
(0788)
PZD9 Write
Sets the MEMOBUS/Modbus address for PZD9 (PPO output). A value of 0, 1, or 2 will
disable the PZD9 (PPO output) write operation to the MEMOBUS/Modbus register.
0 820
F7-69
(0789)
PZD10 Write
Sets the MEMOBUS/Modbus address for PZD10 (PPO output). A value of 0, 1, or 2 will
disable the PZD10 (PPO output) write operation to the MEMOBUS/Modbus register.
0 820
F7-70
(078A)
PZD1 Read (Status Word)
Sets the MEMOBUS/Modbus address for PZD1 (PPO Read). PZD1 (PPO input) functions
as the ZSW when F7-70 = 0.
0 820
F7-71
(078B)
PZD2 Read (Output
Frequency)
Sets the MEMOBUS/Modbus address for PZD2 (PPO Read). PZD2 (PPO input) functions
as the HIW when F7-71 = 0.
0 820
F7-72
(078C)
PZD3 Read
Sets the MEMOBUS/Modbus address for PZD3 (PPO Read). A value of 0 will disable the
PZD3 (PPO Read) load operation from the MEMOBUS/Modbus register.
0 820
F7-73
(078D)
PZD4 Read
Sets the MEMOBUS/Modbus address for PZD4 (PPO Read). A value of 0 will disable the
PZD4 (PPO Read) load operation from the MEMOBUS/Modbus register.
0 821
To Next Page
Loading...
