n071
Torque 0.0 to 3.0 1.0 5.27
Compensation
Gain
(Torq Comp
Gain)
n072
Stall Preven- LED LCD
tion During Setting
Setting
0 or 1 1 5.24
Deceleration 0 Disabled
1 Enabled **
(StallP Decel
Sel)
n073
Stall Preven- 30 to 200 (%) 5.24
tion Level [ When level is set to 200%, stall prevention
See Note 3
During during acceleration is disabled ]
Acceleration
(StallP Accel
Lvl)
n074
Stall Preven- 30 to 200 (%) 5.24
tion Level at [ When level is set to 200%, stall prevention
See Note 3
Set Frequency during running is disabled ]
(StallP Run
Level)
n075
Speed 0.0 to 400.0 0.0 (Hz) 5.20
Coincidence
Frequency
(Freq Det
Level)
n076
Frequency 0.0 to 25.5 2.0 (Hz) 5.20
Agreed Detec-
tion Width
(Freq Det
Width)
A1-10
Table A1-1. Drive Parameters (
nXXX
) – Continued
PARAM.
FUNCTION NAME SETTING FACTORY USER PARA.
NO. (ACTUAL DISPLAY)
DESCRIPTION
RANGE SETTING ** SETTING REF.
To Next Page
Loading...
