YASKAWA HV600

Parameter List
7
7.11 o: Keypad-Related Settings
YASKAWA TOEPYAIH6B01A HV600 AC Drive Narrow Bypass Installation & Startup 221
No.
(Hex.)
Name Description
Default
(Range)
o1-43
(11C3)
RUN
2nd Monitor Area Selection Selects the horizontal range used to display the monitor set in o1-25 [Custom Monitor 2] as a bar
graph. This parameter is only available on an HOA keypad.
0 : +/- Area ( - o1-44 ~ o1-44 )
1 : + Area ( 0 ~ o1-44 )
0
(0 - 1)
o1-44
(11C4)
RUN
2nd Monitor Area Setting Sets the horizontal axis value used to display the monitor set in o1-25 [Custom Monitor 2] as a bar
graph. This parameter is only available on an HOA keypad.
100.0%
(0.0 - 100.0%)
o1-45
(11C5)
RUN
3rd Monitor Area Selection Sets the horizontal range used to display the monitor set in o1-26 [Custom Monitor 3] as a bar graph.
This parameter is only available on an HOA keypad.
0 : +/- Area ( - o1-46 ~ o1-46 )
1 : + Area ( 0 ~ o1-46 )
0
(0 - 1)
o1-46
(11C6)
RUN
3rd Monitor Area Setting Sets the horizontal axis value used to display the monitor set in o1-26 [Custom Monitor 3] as a bar
graph. This parameter is only available on an HOA keypad.
100.0%
(0.0 - 100.0%)
o1-47
(11C7)
RUN
Trend Plot 1 Scale Minimum
Value
Sets the horizontal axis minimum value used to display the monitor set in o1-24 [Custom Monitor 1]
as a trend plot. This parameter is only available on an HOA keypad.
-100.0%
(-300.0 - +300.0%)
o1-48
(11C8)
RUN
Trend Plot 1 Scale
Maximum Value
Sets the horizontal axis maximum value used to display the monitor set in o1-24 [Custom Monitor 1]
as a trend plot. This parameter is only available on an HOA keypad.
100.0%
(-300.0 - +300.0%)
o1-49
(11C9)
RUN
Trend Plot 2 Scale Minimum
Value
Sets the horizontal axis minimum value used to display the monitor set in o1-25 [Custom Monitor 2]
as a trend plot. This parameter is only available on an HOA keypad.
-100.0%
(-300.0 - +300.0%)
o1-50
(11CA)
RUN
Trend Plot 2 Scale
Maximum Value
Sets the horizontal axis maximum value used to display the monitor set in o1-25 [Custom Monitor 2]
as a trend plot. This parameter is only available on an HOA keypad.
100.0%
(-300.0 - +300.0%)
o1-51
(11CB)
RUN
Trend Plot Time Scale
Setting
Sets the time scale (horizontal axis) to display the trend plot. When you change this setting, the drive
automatically adjusts the data sampling time. This parameter is only available on an HOA keypad.
300 s
(1 - 3600 s)
o1-55
(11EE)
RUN
Analog Gauge Area
Selection
Sets the range used to display the monitor set in o1-24 [Custom Monitor 1] as an analog gauge. This
parameter is only available on an HOA keypad.
0 : +/- Area ( - o1-56 ~ o1-56 )
1 : + Area ( 0 ~ o1-56 )
1
(0, 1)
o1-56
(11EF)
RUN
Analog Gauge Area Setting Sets the value used to display the monitor set in o1-24 [Custom Monitor 1] as an analog meter. This
parameter is only available on an HOA keypad.
100.0%
(0.0 - 100.0%)
o1-58
(3125)
Motor Power Unit Selection Sets the setting unit for parameters that set the motor rated power.
0 : kW
1 : HP
1
(0, 1)
o1-80
(31BA)
Fault Screen Display Sets a full-screen display message to show on the keypad when a fault or CPF occurs.
0 : OFF
1 : ON
1
(0, 1)
o1-81
(31BB)
Alarm Screen Display Sets a full-screen display message to show on the keypad when an alarm occurs.
0 : OFF
1 : ON
0
(0, 1)
o1-82
(31BC)
Message Screen Display Sets a full-screen display message to show on the keypad when a status message is active.
0 : OFF
1 : ON
0
(0, 1)