9.3 European Standards
300 YASKAWA TOEPYAIH6B01A HV600 AC Drive Narrow Bypass Installation & Startup
A - SW (ON) B - Screw (OFF)
Figure 9.9 EMC Filter Switch Location 3
A - SW (ON) B - Screw (OFF)
Figure 9.10 EMC Filter Switch Location 4
If you lose an EMC filter switch screw, use Table 9.4 to find the correct replacement screw and install the new screws
with the correct tightening torque.
NOTICE: Only use the screws specified in this manual. If you use screws that are not approved, it can cause damage to the drive.
Table 9.4 Screw Sizes and Tightening Torques
Model Screw Size
Tightening Torque
N∙m
2011 - 2059, 4005 - 4065 M4 × 20
1.0 - 1.3
2075 , 4077 M4 × 30
1.0 - 1.3
To Next Page
Loading...
