YASKAWA SGD7S-****20A Series - Model Designations; Interpreting SERVOPACK Model Numbers

1.4 Model Designations
1.4.1 Interpreting SERVOPACK Model Numbers
1-6
1.4 Model Designations
1.4.1 Interpreting SERVOPACK Model Numbers
*1. You can use these models with either a single-phase or three-phase input.
*2. A model with a single-phase, 200-VAC power supply input is available as a hardware option (model: SGD7S-
120A20A008).
*3. The same SERVOPACKs are used for both Rotary Servomotors and Linear Servomotors.
*4. Refer to the following manual for details.
Σ-7-Series Σ-7S/Σ-7W SERVOPACK with Dynamic Brake Hardware Option Specifications Product Manual (Man-
ual No.: SIEP S800001 73)
*5. The BTO specification indicates if the SEVOPACK is customized by using the MechatroCloud BTO service. You
need a BTO number to order SERVOPACKs with customized specifications.
Refer to the following catalog for details on the BTO specification.
AC Servo Drives Σ-7 Series (Catalog No.: KAEP S800001 23)
000
B
11th+12th+13th
digits
14th
digit
SGD7S
-
R70
A 20 A
001
Σ-7-Series
Σ-7S
SERVOPACKs
4th
digit
1st+2nd+3rd
digits
5th+6th
digits
8th+9th+10th
digits
7th
digit
20
A
Interface
*3
Code Specication
MECHATROLINK-III
communications reference
Design Revision Order
5th+6th digits
7th digit
A 200 VAC
Maximum Applicable
Motor Capacity
Voltage
Code Specication
1st+2nd+3rd digits
4th digit
R70
*1
R90
*1
1R6
*1
2R8
*1
3R8
5R5
*1
7R6
120
*2
180
200
330
470
550
590
780
R70
R90
2R1
2R8
0.05 kW
0.1 kW
0.2 kW
0.4 kW
0.5 kW
0.75 kW
1.0 kW
1.5 kW
2.0 kW
3.0 kW
5.0 kW
6.0 kW
7.5 kW
11 kW
15 kW
0.05 kW
0.1 kW
0.2 kW
0.4 kW
Voltage Code Specication
Three-
Phase,
200 VAC
001
000
002
SGD7S-120A
008
Single-phase, 200-VAC
power supply input
Hardware Options
Specication
8th+9th+10th digits
None
Without options All models
All models
SGD7S-R70A
to -330A
SGD7S-470A
to -780A
Duct-ventilated
Varnished
Rack-mounted
Code
Specication
Applicable
Models
SGD7S-R70A
to -2R8A
020
*4
No dynamic brake
External dynamic
brake resistor
SGD7S-3R8A
to -780A
Single-
Phase,
100 VAC
F 100 VAC
SGD7S-R70F
to -2R8F
SGD7S-R70F
to -2R8F
Specification
Code
FT/EX Specification
Specification
Code
BTO Specification
*5
None
B
None
BTO
specification
None
000
None
11th+12th+13th digits
14th digit