YASKAWA SGD7S-****20A Series User Manual

5.1 Manipulating Parameters (Pn)
5.1.5 Initializing Parameter Settings
5-10
* An Initialize Button will be displayed in the Parameter Editing Dialog Box.
5.1.5 Initializing Parameter Settings
You can return the parameters to their default settings.
This function will not initialize the settings of the parameters that are adjusted for the Fn00C,
Fn00D, Fn00E, and Fn00F utility functions.
Preparations
Always check the following before you initialize the parameter settings.
• The parameters must not be write prohibited.
• The servo must be OFF.
Applicable Tools
The following table lists the tools that you can use to initialize the parameter settings and the
applicable tool functions.
Test Opera-
tion
Jogging
Fn002 Jog
Cannot be
executed.
page 7-7
Program Jogging Fn004 Jog Program
Cannot be
executed.
page 7-14
Alarm
Display Alarm
Fn000 Display Alarm History
Can be
executed.
page 12-44
Fn006 Clear Alarm History
Cannot be
executed.
page 12-45
Reset Motor Type Alarm Fn021 Reset Motor Type Alarm
Cannot be
executed.
page 5-15
Continued from previous page.
SigmaWin+ Digital Operator
When Writ-
ing Is Pro-
hibited
Reference
Button in
Menu
Dialog Box
SigmaWin+ Function
Name
Fn No. Utility Function Name
To enable the new settings, turn the power supply to the SERVOPACK OFF and ON again after
you complete the operation.
Tool Function Reference
Digital Operator Fn005
Σ-7-Series Digital Operator Operating
Manual (Manual No.: SIEP S800001
33)
SigmaWin+ Parameters - Edit Parameters
Operating Procedure on page 5-11
Important

YASKAWA SGD7S-****20A Series Specifications

General

Brand	YASKAWA
Model	SGD7S-****20A Series
Category	Servo Drives
Language	English