YASKAWA Z1000 - Page 218

No. Parameter Name Setting Range Default
Z4-05 Subnet Mask 1
0 to 255
255
Z4-06 Subnet Mask 2 255
Z4-07 Subnet Mask 3 255
Z4-08 Subnet Mask 4 0
n
Z4-09 to Z4-12: Gateway Address 1 to 4
Sets the network gateway address. Z4-09 is the most significant octet of the network gateway address; Z4-12 is the least
significant.
No. Parameter Name Setting Range Default
Z4-09 Gateway Address 1
0 to 255
192
Z4-10 Gateway Address 2 168
Z4-11 Gateway Address 3 1
Z4-12 Gateway Address 4 1
n
Z4-13: Address Startup Mode
Selects the option address setting method.
No. Name Setting Range Default
Z4-13 Address Startup Mode 0 to 2 2
Setting 0: User-Defined (Static IP)
Setting 1: BOOTP
Setting 2: DHCP
n
Z4-14: Duplex Mode Setting
No. Name Setting Range Default
Z4-14 Duplex Mode Setting 0 to 2 1
Setting 0: Forced Half Duplex
Setting 1: Auto Negotiate Duplex Mode and Communication Speed
This setting also auto-negotiates Z4-15, Speed Mode Setting.
Setting 2: Forced Full Duplex
n
Z4-15: Speed Mode Setting
No. Name Setting Range Default
Z4-15 Speed Mode Setting 10, 100 10
Setting 10: 10 Mbps
Setting 100: 100 Mbps
n
Z4-16: Timeout
Sets the Control Connection Timeout value for detection of communication loss in tenths of a second. A value of 0 disables
the connection timeout.
Example: An entered value of 100 represents 10.0 seconds.
No. Name Setting Range Default
Z4-16 Timeout 0 to 300 s 0 s
n
Z4-17 to Z4-22: Scaling Factors
These parameters define scaling factors for drive monitors in the ODVA AC/DC Drive Object (Class 2AH), Instance 1, and
the attribute given below:
Speed Scale is attribute 22
Current Scale is attribute 23
Torque Scale is attribute 24
5.15 Z: Bypass Parameters
218
YASKAWA ELECTRIC SIEP YAIZ1B 01E YASKAWA AC Drive – Z1000 Bypass Technical Manual