Yealink SIP-T52S Administrator's Guide

Troubleshooting
977
Parameters
Permitted
Values
Defa
ult
None
static.syslog.prepend_mac_address.enable
0 or 1
0
Description:
Enables or disables the IP phone to prepend the MAC address to the log messages
exported to the syslog server.
0-Disabled
1-Enabled
Note: For Yealink IP phones (except CP860), it works only if the value of the parameter
“static.syslog.format_type” is set to 0.
Web User Interface:
Settings->Configuration->Syslog Prepend MAC
Phone User Interface:
None
To configure the phone to export the system log to a syslog server via web user interface:
1. Click on Settings->Configuration.
2. Select the desired value from the pull-down list of Enable Syslog Feature.
3. Enter the syslog server address in the Syslog Server field.
4. Enter the syslog server port in the Port field.
5. Select the desired transport type from the pull-down list of Syslog Transport Type.
6. Select the desired log level from the pull-down list of Syslog Level.
7. Select the desired facility from the pull-down list of Syslog Facility.

Yealink SIP-T52S Specifications

General

Touchscreen	-
Display diagonal	2.8 \
Backlight display	Yes
Display resolution	320 x 240 pixels
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
AC adapter input voltage	100 - 240 V
Bluetooth version	2.1+EDR
Security algorithms	802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	G.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume control	Digital
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Front camera	No
Operating system installed	Linux

Weight and Dimensions

Depth	212 mm
Width	211.6 mm
Height	166.8 mm