Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
494
4. Click Confirm to accept the change.
To configure a directed pickup key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select DPickup from the Key Type field.
5. Press or , or the Switch soft key to select the desired line from the Account ID
field.
6. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
7. Enter the directed call pickup code followed by the specific extension in the Value field.
8. Press the Save soft key to accept the change.
Group Call Pickup
Group call pickup is used for picking up incoming calls within a pre-defined group. If the group
receives many incoming calls at once, the user will pick up the first incoming call, using a group
pickup key or the GPickup soft key. This feature depends on support from a SIP server. For
many SIP servers, group call pickup requires a group pickup code, which can be configured on
a phone or a per-line basis.
When you enable group call pickup, the LCD screen will display a GPickup soft key when you
pick up the handset, press the Speakerphone key or press the line key. As shown below:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
