Yealink SIP-T52S - Page 521

Configuring Basic Features
495
Procedure
Group call pickup can be configured using the following methods.
Central
Provisioning
(Configuration
File)
<MAC>.cfg
Configure the group call pickup code on a
per-line basis.
Parameter:
account.X.group_pickup_code
Configure group call pickup features on a
phone basis.
Parameters:
features.pickup.group_pickup_enable
features.pickup.group_pickup_code
<y0000000000xx>.cfg
Assign a group call pickup key.
Parameters:
linekey.X.type/ programablekey.X.type/
expansion_module.X.key.Y.type
linekey.X.line/ programablekey.X.line/
expansion_module.X.key.Y.line
linekey.X.value/ programablekey.X.value/
expansion_module.X.key.Y.value
linekey.X.label/ programablekey.X.label/
expansion_module.X.key.Y.label
linekey.X.shortlabel
Web User Interface
Assign a group call pickup key.
Navigate to:
http://<phoneIPAddress>/servlet?p=dssk
ey&q=load&model=0
Configure the group call pickup code on a
per-line basis.
Navigate to:
http://<phoneIPAddress>/servlet?p=acco
unt-adv&q=load&acc=0
Configure group call pickup feature on a
phone basis.
Navigate to:
http://<phoneIPAddress>/servlet?p=featu
res-callpickup&q=load