Yealink SIP-T52S Administrator's Guide

Setting Up Your System
65
Configuring PC Port Mode
The PC port on the back of the IP phone is used to connect a PC. You can enable or disable the
PC port on the IP phones via web user interface or using configuration files. PC port is not
applicable to CP860/CP920 IP phones.
Procedure
PC port mode can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure the PC port.
Parameter:
static.network.pc_port.enable
Web User Interface
Configure the PC port.
Navigate to:
http://<phoneIPAddress>/servlet?p
=network-pcport&q=load
Details of Configuration Parameter:
Parameter
Permitted Values
Default
static.network.pc_port.enable
0 or 1
1
Description:
Enables or disables the PC port.
0-Disabled
1-Auto Negotiation
Note: It is not applicable to CP860/CP920 IP phones. If you change this parameter, the IP
phone will reboot to make the change take effect.
Web User Interface:
Network->PC Port->PC Port Active
Phone User Interface:
None
To enable the PC port via web user interface:
1. Click on Network->PC Port.

Yealink SIP-T52S Specifications

General

Touchscreen	-
Display diagonal	2.8 \
Backlight display	Yes
Display resolution	320 x 240 pixels
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
AC adapter input voltage	100 - 240 V
Bluetooth version	2.1+EDR
Security algorithms	802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	G.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume control	Digital
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Front camera	No
Operating system installed	Linux

Weight and Dimensions

Depth	212 mm
Width	211.6 mm
Height	166.8 mm