EasyManuals Logo

Yealink SIP-T52S Administrator's Guide

Yealink SIP-T52S
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #419 background imageLoading...
Page #419 background image
Configuring Basic Features
393
4. Press the Save soft key to accept the change.
To configure auto answer and auto answer mute via phone user interface:
1. Press Menu->Features->Auto Answer.
2. Press the or soft key to select Enabled from the Status field.
3. Press the or soft key to select Enabled from the Auto Answer Mute field.
4. Press the Save soft key to accept the change.
IP Direct Auto Answer
IP direct auto answer allows IP phones to automatically answer an IP address call. IP direct auto
answer works only if allow IP call is enabled. For more information on allow IP call, refer to
Allow IP Call on page 394.
Procedure
IP direct auto answer can only be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure IP direct auto answer
feature.
Parameter:
features.ip_call.auto_answer.enable
Web User Interface
Configure IP direct auto answer
feature.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Details of Configuration Parameter:
Parameter
Permitted Values
Default
features.ip_call.auto_answer.enable
0 or 1
0
Description:
Enables or disables the auto answer feature for IP call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone can automatically answer an IP call.
Note: It works only if the value of the parameter “features.direct_ip_call_enable” is set to 1
(Enabled). The IP phone cannot automatically answer the incoming IP call during a call even
if IP call auto answer is enabled.

Table of Contents

Other manuals for Yealink SIP-T52S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T52S and is the answer not in the manual?

Yealink SIP-T52S Specifications

General IconGeneral
Touchscreen-
Display diagonal2.8 \
Backlight displayYes
Display resolution320 x 240 pixels
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
Bluetooth version2.1+EDR
Security algorithms802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume controlDigital
Operating temperature (T-T)-10 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Front cameraNo
Operating system installedLinux
Weight and Dimensions IconWeight and Dimensions
Depth212 mm
Width211.6 mm
Height166.8 mm

Related product manuals