Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
720
Action URL
Action URL allows IP phones to interact with web server applications by sending an HTTP or
HTTPS GET request. You can specify a URL that triggers a GET request when a specified event
occurs. Action URL can only be triggered by the pre-defined events (e.g., Open DND). The valid
URL format is:
http(s)://IP address of the server/help.xml?
.
The following table lists the pre-defined events for action URL.
When the IP phone completes startup.
When the IP phone successfully registers an account.
When the IP phone logs off the registered account.
When the IP phone fails to register an account.
When the IP phone is off hook.
When the IP phone is on hook.
When the IP phone receives an incoming call.
When the IP phone places a call.
When the IP phone establishes a call.
When the IP phone terminates a call.
When the IP phone enables the DND mode.
When the IP phone disables the DND mode.
When the IP phone enables the always forward.
When the IP phone disables the always forward.
When the IP phone enables the busy forward.
When the IP phone disables the busy forward.
When the IP phone enables the no answer forward.
When the IP phone disables the no answer forward.
When the IP phone transfers a call.
When the IP phone blind transfers a call.
When the IP phone performs the semi-attended/attended
transfer.
When the IP phone places a call on hold.
When the IP phone resumes a hold call.
When a call of the IP phone is held.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
