EasyManuals Logo

Yealink SIP-T52S Administrator's Guide

Yealink SIP-T52S
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #821 background imageLoading...
Page #821 background image
Configuring Advanced Features
795
Macro Action
Description
E2/CP860/CP920 IP phones)
status of the BLF/BLF list key. The valid value of the
duration time ranges from 100 to 60000ms.
Can be composed of multiple combination of “color” and
“time”. The status will be stuck in an infinite loop until
triggered by other macros.
Supported colors include (must be lowercase):
r (red)
ri (red; red with incoming mark for SIP-
T48G/S)
ro (red; red with outgoing mark for SIP-
T48G/S)
g (green)
gi (green; green with incoming mark for
SIP-T48G/S)
go (green; green with outgoing mark for
SIP-T48G/S)
o (off)
&L<label> (Optional.): You have to put the “&L<label>
last in the command flow.
Example: $LEDg1000o100r300&Lidle$ means an infinite
loop for BLF/BLF list key LED status: illuminates solid
green for 1000ms, goes out for 100ms and then
illuminates solid red for 300ms. At the same time, the
label of the BLF/BLF list key is changed to “idle”.
Note: The last “color” can be configured without “time”,
and it means permanently displaying the last color until
triggered by other macros. This macro can be only used
for BLF/BLF list feature. For more information, refer to
Configuring BLF LED Status and BLF Key Behavior on page
617.
Configuring EDK Feature
To configure EDK list, EDK prompt, EDK soft keys and custom DSS keys, you have to enable EDK
feature. By default, the EDK feature is disabled.
Yealink IP phones support displaying the softkey id or menu item id by long pressing the
Volume Up key. It is especially useful for those users who need to view the softkey id or menu
item id when configuring EDK macros.

Table of Contents

Other manuals for Yealink SIP-T52S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T52S and is the answer not in the manual?

Yealink SIP-T52S Specifications

General IconGeneral
Touchscreen-
Display diagonal2.8 \
Backlight displayYes
Display resolution320 x 240 pixels
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
Bluetooth version2.1+EDR
Security algorithms802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume controlDigital
Operating temperature (T-T)-10 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Front cameraNo
Operating system installedLinux
Weight and Dimensions IconWeight and Dimensions
Depth212 mm
Width211.6 mm
Height166.8 mm

Related product manuals