Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
574
2. Select the desired value from the pull-down list of Reboot in Talking field.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4. Click OK to reboot the phone.
Answer By Hand
Answer by hand feature allows you to answer an incoming call by picking up the handset,
pressing the Speakerphone key or pressing the HEADSET key directly.
If you disable answer by hand feature, you need to press the corresponding line key or the
Answer soft key to answer an incoming call after picking up the handset, pressing the
Speakerphone key or pressing the HEADSET key. It is not applicable to CP860/CP920 IP phones.
Procedure
Answer by hand can be configured using the configuration files.