EasyManuals Logo

Yealink SIP-T52S Administrator's Guide

Yealink SIP-T52S
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
Setting Up Your System
45
Setting Up Your System
This section describes essential information on how to set up your phone network and set up
your phones with a provisioning server. It also provides instructions on how to set up a
provisioning server, how to deploy Yealink IP phones from the provisioning server, how to
upgrade firmware, and how to keep user personalized settings after auto provisioning.
This chapter provides the following sections:
Setting Up Your Phone Network
Setting Up Your Phones with a Provisioning Server
Setting Up Your Phone Network
Yealink IP phones operate on an Ethernet local area network (LAN) or wireless network. Local
area network design varies by organization and Yealink IP phones can be configured to
accommodate a number of network designs.
In order to get your IP phones running, you must perform basic network setup, such as IP
address and subnet mask configuration. You can configure the IPv4 or IPv6 network parameters
for the phone. You can also configure the appropriate security (VLAN and/or 802.1X
authentication) and Quality of Service (QoS) settings for the IP phone.
This chapter describes how to configure all the network parameters for IP phones, and it
provides the following sections:
DHCP
DHCP Option
Configuring Network Parameters Manually
Configuring Transmission Methods of the Internet Port and PC Port
Configuring PC Port Mode
Web Server Type
Wi-Fi
VLAN
IPv6 Support
VPN
Network Address Translation (NAT)
Quality of Service (QoS)
802.1X Authentication

Table of Contents

Other manuals for Yealink SIP-T52S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T52S and is the answer not in the manual?

Yealink SIP-T52S Specifications

General IconGeneral
Touchscreen-
Display diagonal2.8 \
Backlight displayYes
Display resolution320 x 240 pixels
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
Bluetooth version2.1+EDR
Security algorithms802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume controlDigital
Operating temperature (T-T)-10 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Front cameraNo
Operating system installedLinux
Weight and Dimensions IconWeight and Dimensions
Depth212 mm
Width211.6 mm
Height166.8 mm

Related product manuals