Configuring Basic Features
343
To configure call log feature via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Save Call Log.
3. Click Confirm to accept the change.
To configure call log feature via phone user interface:
1. Press Menu->Features->Others->General->History Record.
2. Press or , or the Switch soft key to select the desired value from the History
Record field.
3. Press the Save soft key to accept the change.
Backing up the Call Logs
Yealink IP phones support storing all call logs to a call log file named <MAC>-calllog.xml. You
can back up this file to the server, avoiding data loss. Once the call logs update, the IP phone
will automatically upload this file to the provisioning server or a specific server. If a call log file
exists on the server, the file will be overridden. The IP phone will request to download the
<MAC>-calllog.xml file according to its MAC address from the server during auto provisioning.
The call log file is named after the MAC address of the IP phone. MAC address, a unique 12-
digit serial number assigned to each phone, can be obtained from the bar code on the back of
the IP phone. For example, if the MAC address of an IP phone is 00156574B150, the name of
the call log file is 00156574b150-calllog.xml (case-sensitive).
It is not applicable to CP860 IP phones.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
