Configuring Basic Features
301
Replace Rule
Replace rule is an alternative string that replaces the numbers entered by the user. IP phones
support up to 100 replace rules, which can be created either one by one or in batch using a
replace rule template. For more information on how to customize a replace rule template, refer
to Customizing Replace Rule Template File on page 303.
Procedure
Replace rule can be created using the following methods.
Central Provisioning
(Configuration File)
Create the replace rule for the IP
phone.
Parameters:
dialplan.replace.prefix.X
dialplan.replace.replace.X
dialplan.replace.line_id.X
Create the replace rule for the IP
phone.
Navigate to:
http://<phoneIPAddress>/servlet?
p=settings-dialplan&q=load
Details of Configuration Parameters:
dialplan.replace.prefix.X
(X ranges from 1 to 100)
String within 32 characters
Description:
Configures the entered number to be replaced.
Example:
dialplan.replace.prefix.1 = 1
Note: It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
Settings->Dial Plan->Replace Rule->Prefix
Phone User Interface:
None
dialplan.replace.replace.X
(X ranges from 1 to 100)
String within 32 characters
To Next Page
Loading...
Need help?
General
Weight and Dimensions
