EasyManuals Logo

Yealink SIP-T52S Administrator's Guide

Yealink SIP-T52S
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #502 background imageLoading...
Page #502 background image
Administrators Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
476
Transfer on Conference Hang Up
For a local conference, all parties drop the call when the conference initiator drops the
conference call. Transfer on conference hang up feature allows the other two parties to remain
connected when the conference initiator drops the conference call. Network conference does
not have a conference initiator, so if any party exits the network conference, the remaining
parties are still connected. For more information on network conference, refer to Network
Conference on page 473.
Procedure
Transfer on conference hang up can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure the transfer on conference
hang up.
Parameter:
transfer.tran_others_after_conf_enabl
e
Web User Interface
Configure the transfer on conference
hang up.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-transfer&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
transfer.tran_others_after_conf_enable
0 or 1
0
Description:
Enables or disables the IP phone to transfer the local conference call to the other two
parties after the conference initiator drops the local conference call.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), all parties are disconnected when the conference initiator drops
the conference call.
If it is set to 1 (Enabled), the other two parties remain connected when the conference
initiator drops the conference call.
Note: It works only if the value of the parameter “account.X.conf_type” is set to 0 (Local
Conference) and the value of the parameter “features.conference.local.enable” is set to 1
(Enabled).

Table of Contents

Other manuals for Yealink SIP-T52S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T52S and is the answer not in the manual?

Yealink SIP-T52S Specifications

General IconGeneral
Touchscreen-
Display diagonal2.8 \
Backlight displayYes
Display resolution320 x 240 pixels
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
Bluetooth version2.1+EDR
Security algorithms802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume controlDigital
Operating temperature (T-T)-10 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Front cameraNo
Operating system installedLinux
Weight and Dimensions IconWeight and Dimensions
Depth212 mm
Width211.6 mm
Height166.8 mm

Related product manuals