Description:
Enables or disables the IP phone to display the GPickup soft key when the IP phone is on
the dialing screen.
0-Disabled
1-Enabled
Web User Interface:
Features->Call Pickup->Group Call Pickup
Phone User Interface:
None
Description:
Configures the group pickup code for account X.
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860/CP920)
Example:
account.1.group_pickup_code = *98
Note: The group call pickup code configured on a per-line basis (configured by the
parameter “account.X.group_pickup_code”) takes precedence over that configured on a
phone basis (configured by the parameter “features.pickup.group_pickup_code”).
Web User Interface:
Account->Advanced->Group Call Pickup Code
Phone User Interface:
None