EasyManuals Logo

Yealink SIP-T52S Administrator's Guide

Yealink SIP-T52S
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #345 background imageLoading...
Page #345 background image
Configuring Basic Features
319
Parameters
Permitted
Values
Default
Phone User Interface:
None
dialplan.digitmap.interdigit_long_timer
Integer
from 0 to
255
10
Description:
Configures the time (in seconds) for the IP phone to wait before dialing an entered number
if it matches part of any string of the digit map.
If it is set to 0, the IP phone will not dial the entered number if it only a partial match exists.
The value of this parameter should be greater than that configured by the parameter
“dialplan.digitmap.interdigit_short_timer”.
For example:
dialplan.digitmap.string = 1xxT|xxxxx<T1>
dialplan.digitmap.interdigit_long_timer = 10
dialplan.digitmap.interdigit_short_timer = 5
When you enter 1, it matches part of two digit maps, the IP phone tries to wait 10 seconds
and then dials out 1 if no numbers entered;
When you enter 15, it also matches part of two digit maps, the IP phone tries to wait 10
seconds and then dials out 15 if no numbers entered;
When you enter 153, it also matches part of two digit maps, the IP phone tries to wait 10
seconds. But after waiting for 5 seconds, it completely matches the first digit map and then
immediately dials out 153.
Note: It works only if the value of the parameter “dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by the
parameter “account.X.dialplan.digitmap.interdigit_long_timer” takes precedence over that
configured by this parameter.
Web User Interface:
None
Phone User Interface:
None
dialplan.digitmap.interdigit_short_timer
Refer to
the
following
content
3
Description:
Configures the timeout interval (in seconds) for any string of digit map.

Table of Contents

Other manuals for Yealink SIP-T52S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T52S and is the answer not in the manual?

Yealink SIP-T52S Specifications

General IconGeneral
Touchscreen-
Display diagonal2.8 \
Backlight displayYes
Display resolution320 x 240 pixels
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
Bluetooth version2.1+EDR
Security algorithms802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume controlDigital
Operating temperature (T-T)-10 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Front cameraNo
Operating system installedLinux
Weight and Dimensions IconWeight and Dimensions
Depth212 mm
Width211.6 mm
Height166.8 mm

Related product manuals