Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
380
The new incoming call is presented to the user visually on the LCD screen.
Call waiting tone allows the IP phone to play a short tone, to remind the user audibly of a new
incoming call during conversation. Call waiting tone works only if call waiting is enabled. You
can customize call waiting tone or select specialized tone sets (vary from country to country)
for your IP phone. For more information, refer to Tones on page 834.
The call waiting on code and call waiting off code configured on IP phones are used to
activate/deactivate the server-side call waiting feature. They may vary on different servers.
Procedure
Call waiting and call waiting tone can be configured using the following methods.
Description:
Enables or disables call waiting feature.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), a new incoming call is automatically rejected by the IP phone with