Yealink SIP-T52S Administrator's Guide

Getting Started
43
If you are using CP860 IP phones, and the phones are first powered on or the phone settings
are reset to factory defaults, the setup wizard will appear on the LCD screen after startup. If not,
go to the next step.
Note
3. The main LCD screen displays the following:
 Time and date
 Soft key labels
4. Press the OK/√ key or press Menu->Status to check the IP phone status, the LCD screen
displays the valid IP address, MAC address, firmware version, etc.
If the IP phone has successfully passed through these steps, it starts up properly and is ready
for use.
For more information on the setup wizard, refer to Yealink_CP860_User_Guide .

Yealink SIP-T52S Specifications

General

Touchscreen	-
Display diagonal	2.8 \
Backlight display	Yes
Display resolution	320 x 240 pixels
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
AC adapter input voltage	100 - 240 V
Bluetooth version	2.1+EDR
Security algorithms	802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	G.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume control	Digital
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Front camera	No
Operating system installed	Linux

Weight and Dimensions

Depth	212 mm
Width	211.6 mm
Height	166.8 mm