EasyManuals Logo
Home>Yealink>IP Phone>SIP-T52S

Yealink SIP-T52S Administrator's Guide

Yealink SIP-T52S
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #819 background imageLoading...
Page #819 background image
Configuring Advanced Features
793
Macro Action
Description
Hold
Redial
Transfer
Speaker
Conference
ExtX@Y (X stands for the serial number of
expansion module key, Y stands for the
serial number of expansion module; For
SIP-T48S/T48G/T46S/T46G/T29G: X
ranges from 1 to 40, Y ranges from 1 to 6;
For SIP-T54S/T52S: X ranges from 1 to 60,
Y ranges from 1 to 3; @Y can be omitted
if there is only one expansion module
connected to the phone.)
Menu (You can enter menu by executing
this command at any interface except the
non-executable situations. For example,
entering menu is blocked during an active
call.)
Home (You can return back to idle screen
by executing this command at dialing
screen for SIP-T48G/S IP phones)
Example: $KDialPadPound$ means pressing the pound
key.
Note: If a key (e.g., Redial key) is not found but the
function is available, perform the corresponding action. If
a key is not found and the function is unavailable, the
execution of the action string will be ignored.
$I<menu item ID>$
The action to be performed for positioning and entering
the desired menu item.
Each menu item has a unique identifier on the IP phone,
you can configure this parameter according to the
system-defined menu item ID. If the menu item ID is not
defined on the phone or there is no matched menu item
on the current screen, the execution of the action string
will be ignored. The menu item ID is case-insensitive.
Example: $Istatus_list& means entering the Status menu.
Note: To view the menu item ID, you can configure the
value of the parameter “edk.id_mode.enable” to 1
(Enabled) and then long press the Volume Up key when

Table of Contents

Other manuals for Yealink SIP-T52S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T52S and is the answer not in the manual?

Yealink SIP-T52S Specifications

General IconGeneral
Touchscreen-
Display diagonal2.8 \
Backlight displayYes
Display resolution320 x 240 pixels
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
Bluetooth version2.1+EDR
Security algorithms802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume controlDigital
Operating temperature (T-T)-10 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Front cameraNo
Operating system installedLinux
Weight and Dimensions IconWeight and Dimensions
Depth212 mm
Width211.6 mm
Height166.8 mm

Related product manuals