EasyManuals Logo

Yealink SIP-T52S Administrator's Guide

Yealink SIP-T52S
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
Administrators Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
58
Parameters
Permitted Values
Default
Menu->Advanced (default password: admin) ->Network->WAN Port->IP Mode
static.network.internet_port.ip
IPv4 Address
Blank
Description:
Configures the IPv4 address.
Example:
static.network.internet_port.ip = 192.168.1.20
Note: It works only if the value of the parameter “static.network.ip_address_mode” is set to
0 (IPv4) or 2 (IPv4 & IPv6), and static.network.internet_port.type” is set to 2 (Static IP
Address). If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->IP Address
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4->Type (Static
IP)->IP Address
static.network.internet_port.mask
Subnet Mask
Blank
Description:
Configures the IPv4 subnet mask.
Example:
static.network.internet_port.mask = 255.255.255.0
Note: It works only if the value of the parameter “static.network.ip_address_mode” is set to
0 (IPv4) or 2 (IPv4 & IPv6), and static.network.internet_port.type” is set to 2 (Static IP
Address). If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->Subnet Mask
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4->Type (Static
IP)->Subnet Mask
static.network.internet_port.gateway
IPv4 Address
Blank
Description:
Configures the IPv4 default gateway.
Example:

Table of Contents

Other manuals for Yealink SIP-T52S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T52S and is the answer not in the manual?

Yealink SIP-T52S Specifications

General IconGeneral
Touchscreen-
Display diagonal2.8 \
Backlight displayYes
Display resolution320 x 240 pixels
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
Bluetooth version2.1+EDR
Security algorithms802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume controlDigital
Operating temperature (T-T)-10 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Front cameraNo
Operating system installedLinux
Weight and Dimensions IconWeight and Dimensions
Depth212 mm
Width211.6 mm
Height166.8 mm

Related product manuals