Yealink SIP-T52S - Page 932

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
906
VQ-RTCPXR can be configured using the following methods.
Central
Provisioning
(Configuratio
n File)
<y0000000000xx>.
cfg
Configure the generation of session packets.
Parameter:
phone_setting.vq_rtcpxr.session_report.enable
Configure the generation of interval packets.
Parameters:
phone_setting.vq_rtcpxr.interval_report.enable
phone_setting.vq_rtcpxr_interval_period
Configure the generation of alert packets.
Parameters:
phone_setting.vq_rtcpxr_moslq_threshold_warning
phone_setting.vq_rtcpxr_moslq_threshold_critical
phone_setting.vq_rtcpxr_delay_threshold_warning
phone_setting.vq_rtcpxr_delay_threshold_critical
Configure the phone to display RTP status showing
the voice quality report of the last call on the web
user interface.
Parameter:
phone_setting.vq_rtcpxr.states_show_on_web.enable
Configure the phone to display RTP status showing
the voice quality report of the last call or the current
call on the phone user interface.
Parameter:
phone_setting.vq_rtcpxr.states_show_on_gui.enable