Yealink VC110 - Page 29

VC110 Video Conferencing Endpoint Introduction
13
There is a power switch on its bottom. You can turn off this switch if the VCM60 is not in use for
a long period of time.
Name
Description
①
Battery Indicator LED
Indicates the battery information. For more information on
the mute indicator LED, refer to LED Instructions on page
36.
②
Built-in Microphone
Supports 360-degree audio pickup at a radius of up to 2
meters.
③
Mute Button
 Mutes or unmutes the VCM60. For more information
on the mute indicator LED, refer to LED Instructions
on page 36.
 Activates the VCM60 to search for the dongle when it
is in the offline standby mode. For more information,
refer to Standby Mode on page 33.
 Enters registration mode. For more information, refer
to Registering and Unregistering the VCM60 on page
18.
④
Charging Interface
Connects the VCM60 to a power adapter or a computer's
USB port using a USB cable to charge the VCM60.
⑤
Switch
Turns on or off the VCM60.
Placing the VCM60
The VCM60 has a rubber pads on its base to prevent it from sliding. You can place the VCM60
on a conference table. Do the following to ensure optimal voice quality:
 For registering to the dongle successfully, make sure the VCM60 video conferencing
wireless microphone is less than 30 meters distant from the dongle.
 Place the VCM60 on a stable surface and keep it away from obstacles so that it can