Using the VC800 Video Conferencing System
133
4. Click Confirm to accept the change.
Note
View Switching
View switching enables to switch video images on the display device automatically. The
switching is initiated when the number of participants exceeds the number of windows in the
selected video layout. You can configure view switching via web user interface only.
Average Mode
Up to 9 video images can be displayed in Equal N×N layout. When the number of participants
exceeds 9, all participants’ video images will be switched automatically.
To configure view switching via web user interface:
1. Click on Setting->Conference Setting.
2. In the Average Mode field, select the desired value from the pull-down list of View
Switching Interval.
By default, the video images will be switched automatically every 30 seconds.
3. Do one of the following:
- Mark the Single View Round radio box to switch one video image at a time.
- Mark the Full Screen Round radio box to switch all video images at a time.
Voice activation takes effect only when there are more than two participants in a conference call.
To Next Page
Loading...
