User Guide for the VC800 Video Conferencing System
134
4. Click Confirm to accept the change.
Note
1+N Mode
Up to 8 video images can be displayed in Speaker View layout and OnePlusN layout. When the
number of participants exceeds 8, all participants’ video images (except the active speaker) will
be switched automatically.
To configure view switching via web user interface:
1. Click on Setting->Conference Setting.
2. In the 1+N Mode field, select the desired value from the pull-down list of View Switching
Interval.
By default, the video images will be switched automatically every 30 seconds.
3. Do one of the following:
- Select the desired value from the pull-down list of View Round.
You can configure how many video images to be switched at a time.
In Equal N×N layout, video image of the active speaker is indicated by an orange border.
If you shares content in Equal N×N layout, the location of PC content is fixed at the top-left
corner and will not be switched automatically.
To Next Page
Loading...
