Yealink W52P

User Guide for the W52P IP DECT Phone
92
To export the boot log to a local PC via web user interface:
1. Click on Settings->Configuration.
2. Select Enabled from the pull-down list of Enable Local Logging.
3. Select boot.log from the pull-down list of Export Local Log.
4. Click Confirm to accept the change.
5. Click Export to open the file download window, and then save the file to your local system.
How to export all diagnostic files?
We may need you to provide three types of diagnostic files (including PCAP trace, system log
and BIN configuration file) to help analyze your problem. You can export these files at a time.
To export all diagnostic files via web user interface:
1. Click on Settings->Configuration.
2. Click Start to begin capturing signal traffic.
The system log level will be automatically set to 6.
3. Reproduce the issue.
4. Click Stop to stop the capture.
The system log level will be reset to 3.