Yealink W52P

Basic Operations
17
Returning to Idle Screen
To return to the idle screen via the handset:
1. Long press to quickly exit the menu and return to the idle screen.
If you do not press any key in a period of time, the LCD screen will automatically exit the menu
and return to the idle screen.
Note
Entering Data and Editing Fields
You can enter and edit data in the corresponding field using the handset keypad.
Configuring the Input Modes
The handset provides you with 12 different input modes. Keypad on the handset provides
different characters (or numbers) when using different input modes.
For more details on the input modes and character (or number) options for the keypad, refer to
Appendix C - Input Modes and Characters on page 98.
You can enable the frequently used input mode. Then you can switch among the enabled input
modes when entering or editing.
To configure the input mode via the handset:
1. Press to enter the main menu.
2. Select Settings->Display->Input Method.
The LCD screen displays all available input modes.
3. Press or to highlight the desired input mode.
4. Press the Change soft key to check or uncheck the checkbox.
Editing Fields
There are limitations for certain types of the fields on handset as follow:
- Name and Password field: enter any characters that the handset provided.
- Number field: only enter the numeric characters, dot or #.
- IP address field: enter the 32-bit IPv4 address or 128-bit IPv6 address.
When you are navigating the menu, the LCD screen will automatically exit the menu if an
incoming call arrives. The incoming call can be handled as usual. When the call is terminated, the
LCD screen will return to the idle screen.