Yealink W52P

User Guide for the W52P IP DECT Phone
50
For multiple numbers, enter a comma between every two emergency numbers. The default
emergency numbers are 112, 911 and 110.
3. Click Confirm to accept the change.
Then you can dial the emergency numbers when the keypad is locked.
Outgoing Lines
After the handset is registered to the base station (refer to Handset Registration), you can assign
one or more outgoing lines for the handset. The handset can only use the assigned outgoing
line(s) to place calls. When multiple outgoing lines are assigned to the handset, the handset uses
the first line as the default outgoing line. You can change the default outgoing line of the
handset.
To assign the outgoing line to specific handset via web user interface:
1. Click on Account->Number Assignment.
2. Check the desired checkbox of the account from Line No.&Name field for the
corresponding handset in the Handset No. field.