Yealink W52P

User Guide for the W52P IP DECT Phone
24
Registering Accounts
The base station supports up to 5 lines. You can register an account for each line via web user
interface.
To register an account via web user interface:
1. Click on Account->Register.
2. Select the desired account from the pull-down list of Account.
3. Select Enabled from the pull-down list of Line Active.
4. Enter the valid value in the Label, Display Name, Register Name, User Name, Password
and SIP Server1/2 field respectively.
5. If you use the outbound proxy servers, do the following:
1) Select Enabled from the pull-down list of Enable Outbound Proxy Server.
2) Enter the desired value in the Outbound Proxy Server 1/2 and Proxy Fallback
Interval field respectively.
Contact your system administrator for the account information.
6. Click Confirm to accept the change.