Yealink W52P

User Guide for the W52P IP DECT Phone
6
Handset Information
The handset provides 1.8’’ color screen, and six changeable shortcut keys. It also supports a
2.5mm jack for earphone connection.
For the maintenance, read and follow as shown below:
1. Do not use the handset near sources of electric such as microwave oven, TV sets or radios.
2. Keep the handset away from fire and moisture. Do not use the handset outdoors in the rain
or handle it with wet hands.
3. Clean it only with a soft cloth. Do not use excess water or cleaning solvents of any kind.
4. Care should be taken that not to fall onto the floor.
5. Do not disassemble the handset.
Battery Information
We strongly recommend you use the same type rechargeable battery, or it may damage the
unit.
Technology: Nickel Metal Hydride (NiMH)
Size: AAA
Voltage: 1.2V
Capacity: 800mAh
We strongly recommend you use the batteries complying with the above parameters. Because
the compliant ones can guarantee the specified operating time, full functionality and long
service life. The operating time of your handset depends on the capacity and age of the
batteries and the way they are used.
We recommend you use only the batteries that came with the handset or replacement batteries
approved by Yealink technology:
 Sanyo NiMH 800
 GP 850 mAh
 Yuasa Technologies AAA 800
Battery Capacity
The capacity of the battery depends on the use of backlight and talk time.
Charging time: approximately 6 hours (fully discharged to full capacity).
Standby time: up to 100 hours when the backlight is disabled.
Talk time: up to 10 hours active talk time (with full charged batteries).
The operating time of your handset depends on the capacity and age of the battery and the way
they are used.