Yealink W52P

Phone Settings
55
Placing a Call Using Speed Dial Key
To place a call using the speed dial key via the handset:
1. Long press the speed dial key (digit key 2-9) when the handset is idle.
The number assigned to this speed dial key is dialed out.
Auto Answer
When auto answer feature is enabled, you can simply answer the incoming calls by picking up
the handset from the charger cradle without having to press the off-hook key. The auto answer
feature works only if the handset is placed in the charger cradle.
To configure auto answer via the handset:
1. Press to enter the main menu.
2. Select Settings->Telephony->Auto Answer.
3. Press the Change soft key to check or uncheck the Auto Answer checkbox.
Auto Intercom
Intercom is a useful feature in an office environment to quickly connect with the operator or the
secretary. You can make internal intercom calls and external intercom calls on the phone.
Internal intercom calls are made between handsets registered to the same base station. External
intercom calls can be made by dialing the feature access code followed by the number. External
intercom calls depend on support from a SIP server.
The handset can automatically answer an incoming external intercom call and play warning tone
only when there is only one handset subscribed and no call in progress on the handset.
To automatically answer an incoming internal intercom call, you need to enable auto intercom
feature on the handset. The following configuration types of auto intercom feature are available
for selection:
 On (Beep On): Auto intercom feature is on. The handset will answer an incoming internal
intercom call automatically and play a warning tone.
 On (Beep Off): Auto intercom feature is on. The handset will answer an incoming internal
intercom call automatically without a warning tone.
 Off: Auto intercom feature is off. You need to answer an incoming internal intercom call
manually.
To configure auto intercom via the handset:
1. Press to enter the main menu.
2. Select Settings->Telephony->Auto Intercom.
The LCD screen displays three configuration types.