Yealink W52P

Phone Settings
33
2. Select Settings->Display->Color Schemes.
3. Press or to highlight the desired color scheme and preview its effect.
4. Press the Select soft key to mark the radio box of the highlighted color theme.
The color theme of the handset is changed accordingly.
Keypad Light
You can enable the keypad light to make the keypad light up when any key is pressed. This
helps you distinguish keys from each other in a dark environment.
To configure keypad light via the handset:
1. Press to enter the main menu.
2. Select Settings->Display->Keypad Light.
3. Press the Change soft key to check or uncheck the Keypad Light checkbox.
Notification Light
Notification light is used to indicate voice mails and missed calls. When the handset receives a
voice mail or misses a call, the message key LED flashes red. You can configure the notification
light to indicate the voice mails or missed calls respectively.
To configure notification light via the handset:
1. Press to enter the main menu.
2. Select Menu->Display->Notification Light.
3. Press or to select the desired value from the Voice Mail field.
If Enabled is selected, the message key LED flashes red when the handset receives a voice
mail.
If Disabled is selected, the message key LED will not flash when the handset receives a
voice mail.
4. Press or to select the desired value from the Missed Call field.
If Enabled is selected, the message key LED flashes red when the handset misses a call.
If Disabled is selected, the message key LED will not flash when the handset misses a call.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Date and Time
Date and time are displayed on the idle screen of your handset. The handset obtains the date
When you press the Message key to view the missed calls or the received messages, the message
key LED will go out.