User Guide for the W52P IP DECT Phone
62
You can place a call using the following call modes:
Earpiece mode—pressing the off-hook key to dial out.
Speakerphone mode—pressing the Speakerphone key to dial out.
Earphone mode—connecting a standard 2.5mm earphone.
During the call, you can do the following:
- Switch among the call modes by pressing the corresponding key or connecting an
earphone.
- Connect or disconnect the earphone.
- Press or to adjust the volume of the currently engaged audio device (earpiece,
earphone or Speakerphone).
You can cancel the dialing operation by pressing the on-hook key. The call duration is displayed
on the LCD screen while the call is in progress.
Placing Internal Calls
You can make free internal calls between the handsets registered to the same base station. You
can place an internal call to one handset or all handsets registered to the same base station. If
the auto intercom feature is enabled, the handset will answer the internal call automatically. For
more information, refer to Auto Intercom on page 55.
Note
To place an internal call to one handset via the handset:
1. Press to enter the main menu.
2. Select Intercom.
The LCD screen displays all registered handset names and the All HS option.
3. Press or to highlight the desired handset name.
4. Press , , or the OK soft key to dial out.
To place an internal call to all handsets via the handset:
1. Press to enter the main menu.
2. Select Intercom.
The LCD screen displays all registered handset names and the All HS option.
3. Press or to highlight All HS.
4. Press , , or the OK soft key to dial out.
All other subscribed handsets will ring simultaneously.
The handset must be subscribed and registered to the same base station to place a call. For more
information on registration, refer to Handset Registration on page 19.