Yealink W52P

Phone Settings
57
To reset the base station via the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Base Reset.
3. Enter the system PIN (default: 0000), and then press the Done soft key.
4. Highlight Reset to factory, and then press the OK soft key.
All individual settings of the base station will be reset to factory defaults. The power
indicator LED and network status LED on the base station slow flash in sequence during the
resetting process. Indicator LEDs on the base station illuminate solid green after startup.
Reset the base station is also configurable via the web user interface at the path:
Settings->Upgrade.
Note
Handset Reset
You can reset individual settings that you have made on the handset. Resetting handset will not
overwrite settings of directory, call history, voice mail and the handset registration to the base
station. Other customized settings on the handset will be reset to factory settings after handset
reset. We recommend that you ask your system administrator for advice before resetting your
handset.
To reset the handset via the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Handset Reset.
The LCD screen prompts “Reset handset to default?”.
3. Press the Yes soft key to reset the handset or the No soft key to cancel.
Auto Provision
You can trigger the auto provisioning process using the wizard. After you enter the user name
and password in the wizard and confirm to perform an update, the base station tries to connect
the RPS (Redirection and Provisioning Service) server. If the base station successfully connects
the RPS server, the RPS server will respond the base station with the URL for downloading the
configuration files. Then the base station will try to perform auto provisioning. Contact your
system administrator for the user name and password used to connect the RPS server.
To trigger the auto provisioning process via the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Auto Provision.
Base station reset may take a few minutes. Do not power off until the base station starts up
successfully.