Yealink W52P

Phone Settings
41
To search for contacts in the local directory via the handset:
1. Press to enter the main menu.
2. Select Directory.
3. Enter a few continuous characters of the desired contact name or number using the keypad.
The contact whose name or number matches the search will appear on the LCD screen after
a timeout. You can dial a contact from the result list.
Placing a Call from Local Directory
To place a call from the local directory via the handset:
1. Press to enter the main menu.
2. Select Directory.
3. Press or to highlight the desired entry.
4. Do one of the following:
- Press , if only one number is stored for the contact in the local directory, the
phone will dial out the number directly.
- Press , if both the office number and the mobile number are stored for the
contact in the local directory, the screen will display two numbers.
Press or to highlight the desired number.
Press to dial out.
Blacklist
You can store up to 30 contacts in one handset’s blacklist. You can add, edit or delete contacts
in the blacklist. You can also dial a call from the blacklist, but an incoming call from a contact in
the blacklist will be rejected automatically.
To add an entry to the blacklist manually via the handset:
1. Press to enter the main menu.
2. Press Settings->Telephony->Caller Blacklist.
3. Press the Options soft key, and then select New Entry.
If there is no entry, press the OK soft key directly.
4. Enter the desired number in the Phone Number field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also add an entry to the blacklist from the call history. For more information, refer to
Call History Management on page 44.
To delete an entry from the blacklist via the handset:
1. Press to enter the main menu.