Call Features
77
1 without having to scroll through the menu when the handset is idle.
1. Press to enter the main menu.
2. Select Voice Mail->Set Key 1.
3. (Optional.) Press or to highlight the desired line and then press the Select soft
key.
The radio box of the selected line is marked.
To listen to the voice mail using the menu via the handset:
1. Press to enter the main menu.
2. Select Voice Mail->Play Message.
3. (Optional.) Press or to highlight the desired line, and then press the Select soft
key.
The handset dials out the voice mail access code using the selected line automatically.
Follow the voice prompt from the system server to listen to your voice mails.
Note
To listen to the voice mail via fast access via the handset:
1. Long press when the handset is idle.
The handset automatically dials out the voice mail access code using the line you selected
when configuring fast access for voice mail.
If you have not set the voice mail access code, it will enter the setting screen, you should
configure it first.
2. Follow the voice prompt from the system server to listen to your voice mails.
You can also listen to the voice mail by pressing to enter the Messages & Calls screen.
Select the desired line and then press the Select soft key.
Note
Shared Call Appearance (SCA)
You can use Shared Call Appearance (SCA) feature to share an extension which can be
registered on two or more IP phones at the same time.
If two phones share a line, an incoming call to this extension will cause both phones to ring
simultaneously. The incoming call can be answered on either a phone but not both.
This feature is very useful in the boss and secretary scenario. For example, the secretary can
share the boss's extension on her phone. When there is an incoming call to the extension of the
Before listening to the voice mails, make sure the voice mail access code has been configured.
When all new voice mails are retrieved, the icon will disappear from the screen.
Before listening to voice mails, make sure the voice mail access code has been configured.
To Next Page
Loading...
