User Guide for the W52P IP DECT Phone
36
If the selected location uses daylight saving time, the Start Date, End Date and
Offset(minutes) fields will be filled with time automatically. All of them are read-only.
5. Click Confirm to save the change.
The phone will use the daylight saving time of the selected location.
Note
To configure the DST manually via web user interface:
1. Click on Settings->Time & Date.
2. Select the desired time zone from the pull-down list of Time Zone.
3. Mark the Enabled radio box in the Daylight Saving Time field.
4. Do one of the following:
- Mark the radio box of DST by Date in the Fixed Type field.
If the location you select does not use daylight saving time, the fields of Start Date, End Date and
Offset will be left blank.
To Next Page
Loading...
