Yealink W52P

Phone Settings
43
4. Click Confirm to accept the change.
Note
You can enable the handset to present the caller/callee identity stored in the remote phone
book when receiving/placing a call.
To configure incoming/outgoing call lookup and update time interval via web user
interface:
1. Click on Directory->Remote Phone Book.
2. Select Enabled from the pull-down list of Incoming/Outgoing Call Lookup.
3. Enter the desired refresh period in the Update Time Interval(Seconds) field.
The default value is 21600 seconds.
4. Click Confirm to accept the change.
To access your remote phone book via the handset:
1. Press to enter the main menu.
2. Select Directory.
3. Press or to highlight the desired remote phone book, and then press the Enter
soft key.
The handset connects to the remote phone book and proceeds to load it. The contacts in
the remote phone book are displayed on the LCD screen.
To place a call from the remote phone book:
1. Press to enter the main menu.
2. Select Directory.
3. Press or to highlight the desired remote phone book, and then press the Enter
soft key.
The handset connects to the remote phone book and proceeds to load it. The contacts in
the remote phone book are displayed on the LCD screen.
4. Select the desired contact from the remote phone book.
All the handsets that are registered to the base station can access to the remote phone book.