Yealink W52P

Phone Settings
47
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Add to add the replace rule.
When you enter the number “1” using the keypad and then dial out using the configured
account, the handset will dial out “104” instead.
Note
To edit a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select the desired replace rule by clicking the replace rule or checking the check box.
3. Edit the value in the Prefix and Replace field respectively.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Edit to accept the change.
To delete one or more replace rules via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select one or more replace rules by clicking the replace rule(s) or checking the check
box(es).
3. Click Delete to delete the replace rule(s).
Note
The valid value of the “Account” parameter can be one or more digits among 1, 2, 3, 4 and 5, each
of which represents a line ID. Multiple digits must be separated by commas. For example, when
you enter the value “1, 2” in the Account field, this dial plan rule will apply to account1 and
account2.
If you leave the Account field blank or enter 0, this dial plan rule will apply to all accounts.
Replace rule is configurable via web user interface only.
Replace rule is applicable to all the handsets registered to the base station.