Yealink W52P

User Guide for the W52P IP DECT Phone
52
To assign the incoming line to handset via web user interface:
1. Click on Account->Number Assignment.
2. Check the desired checkbox of the account from Line No.&Name field for the
corresponding handset in the Handset No. field.
3. Click Confirm to save the change.
As the configuration shown above, you can do the following:
- For Line 1: Line 1 (1023) is assigned to Handset2. A call to line 1 (1023) will be received by
Handset2.
- For Line 2: Line 2 (104) is assigned to Handset3. A call to line 2 (104) will be received by
Handset3.
- For Line 3: Line 3 (1045) is assigned to Handset1 and Handset2. A call to line 3 (1045) will
be received by Handset1 and Handset2 at the same time. The handsets ringing
simultaneously, the incoming call can be only answered by one of them.
To assign the incoming line to handsets via the handset:
1. Press to enter the main menu.
2. Select Settings->Telephony->Incoming Lines.
3. Enter the system PIN (default: 0000), and then press the Done soft key.
The LCD screen displays all handsets registered to the base station. The handset itself is
highlighted and followed by a left arrow.
4. Press or to highlight the desired handset, and then press the OK soft key.
5. Press or to select Accept from the desired line fields.
6. Press the Save soft key to accept the change.