Yealink W52P

Call Features
69
 Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1. Press the Options soft key during a call, and then select Transfer.
You can also press directly.
2. Enter the number or select the handset you want to transfer the call to.
3. Press or the Transfer soft key.
The call is connected to the number or the handset you specified.
To perform a semi-attended transfer via the handset:
1. Press the Options soft key during a call, and then select Transfer.
You can also press directly.
2. Do one of the following:
- Enter the number or select the handset you want to transfer the call to.
Press , or to dial out.
- Press the Directory soft key, and then select the desired contact.
Press , , or the Call soft key.
If both the office number and the mobile number of the contact are stored, select the
desired number and then press , or to dial out.
3. Press or the Transfer soft key to complete the transfer when receiving the ring-back.
To perform an attended transfer via the handset:
1. Press the Options soft key during a call, and then select Transfer.
You can also press directly.
2. Do one of the following:
- Enter the number or select the handset you want to transfer the call to.
Press , or to dial out.
- Press the Directory soft key, and then select the desired contact.
Press , , or the Call soft key.
If both the office number and the mobile number of the contact are stored, select the
desired number and then press , or to dial out.
3. Press or the Transfer soft key to complete the transfer after the party answers the call.
To transfer a call to another party when there are two calls on the handset:
1. Place a call to user A.
2. Place another call to user B.
Two calls are established on the handset.
3. Select the desired call (e.g., the call with user A) and make sure the call is active.