Yeastar Technology MyPBX Standard Administrator's Guide

MyPBX Standard Administrator Guide
96
or A~F in hex, the A~F are not case sensitive.
Action
Accept: Accept the access from remote hosts.
Drop: Drop the access from remote hosts.
Ignore: Ignore the access.
Note: the MAC address will be changed when it’s a remote device, so it will not be
working to filter using MAC for remote devices.
3) Auto Defense
Figure 19-6Auto Defense
Table 19-3 Description of Auto Defense
Items
Description
Port
The port you want to auto defense, for example, 8022.
Protocol
Select the protocol. You can select UDP or TCP.
Rate
The maximum packets or connections can be handled per unit
time.For example, if you configure it as below:
Port: 8022
Protocol: TCP
Rate: 10/min
Then, it means maximum 10 TCP connections can be handled in
1 minute. The 11
th
connection will be dropped.
IP Blacklist
You can set some packets accept speed rules here. When an IP address, which
hasn’t been accepted in common rules, sends packets faster than the allowed speed,
it will be set as ablack IP address and beblocked automatically.

Yeastar Technology MyPBX Standard Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard
Category	PBX
Language	English