Yeastar Technology MyPBX Standard - Call Transfer; Blind Transfer; Attended Transfer; Call Pickup

MyPBX Standard Administrator Guide
67
Enable Forward When Busy
Default Code: *72.
Disable Forward When Busy
Default Code: *072.
Enable Forward No Answer
Default Code: *73.
Disable Forward No Answer
Default Code: *073.
Forward to Number
Default Code: *74.
Forward to Voicemail
Default Code: *074.
Enable Do Not Disturb
Default Code: *75.
Disable Do Not Disturb
Default Code: *075.
Call Transfer
There are 2 types of call transfers available on MyPBX Standard: Blind Transfer and
Attended Transfer. Users can achieve call transfer by pressing the feature code
during the call.
Blind Transfer
Default feature code: *03
1. Dial "*03" during the call;
2. Dial the called number after hearing a prompt "transfer";
3. The call will be transferred after the number is dialed.
Attended Transfer
Default feature code: *3
1. Dial "*3" during the call;
2. Dial the called number after hearing a prompt "transfer";
3. Talk to the transfer recipient;
4. The call will be transferred after hanging up.
OnPBX→Basic Settings→General Preferences page, you can set the Attended
Transfer Caller ID. The default display is the Caller ID of the initiator.
For example, if extension 500 makes a call to extension 501. After 501 picks up the
call, user501 makes an attended transfer to extension 502.
 If selecting “Transferer”, 502 will display the Caller ID as 501;
 If selecting “Transferee”, 502 will display the Caller ID as 500.
Call Pickup
Call Pickup is a feature that allows one to answer someone else's call. The feature is