MyPBX Standard Administrator Guide
7
The BRI port could be connected to the BRI line and the BRI port of a traditional
PBX with a BRI RJ45-RJ11 cable.
Connection of GSM/UMTS/CDMA
Step 1: Open the Upper case of MyPBX.
Step 2: Insert the SIM card.
Step 3: Connect the antenna.
Power Connection
Connect the power adapter to the MyPBX Standard’s powerport, and then plug the
power socket into an electrical outlet. The device will start booting. In the meantime,
users would see that the “POWER” and “RUN” indicator lights turn on.
Note:please switch off the power before plugging or unplugging the cables.
Connection Diagram
To Next Page
Loading...
