To Next Page

To Previous Page

MyPBX Standard Administrator Guide

the feature codes for each spy mode.

 Spy Modes

 General spy: you have the permission to use the following 3 modes.

 Normal spy: you can only hear the call, but can't talk. Feature code: *90.

 Whisper spy: you can hear the call, and can talk with the monitored extension.

Feature code: *91.

 Barge spy: you can hear the call and talk with them both. Feature code: *92.

 Steps to Use Spy Feature

Example: UseExtension100to monitor the calls ofExtension 101.

1. Enable"Allow Being Spied" in extension 101. In this case, extension 101 is

allowed to be spied by other extensions.

2. Choose the "Spy Modes" for extension 100. In this case, extension 100 has the

right to use the feature code to monitor extension 101.

3. If 100 choose “normal spy”, it should dial “*90301” to start monitoring;

If 100 choose “whisper spy”, it should dial “*91301” to start monitoring;

If 100 choose “barge spy”, it should dial “*92301” to start monitor;

If 100 choose “general spy”’, it can dial “*90301”, “*91301” or “*92301” to start

monitor.

Call Parking

Call Parking is a feature that allows the user to put a call on hold at one phone and

continue the conversation from any other phone. Call parking is activated by feature

code. For example, extension 8010 is in a call, but the person needs to go to another

place to find the answer for a question.He can dial Call Parking feature code on the

phone, and system will prompt that the call is parked at an extension, i.e. 690.Then

this person can hang up the call and leave. When he finds the information, he can pick

up any phone nearby and dial 690 to resume the conversation.

 Uses of Call Parking

Call parking is often useful in buildings with many offices or with more than one floor,

and with most of the areas having access to one or more telephone sets.

 If the desired called party is not the person who picked up the call, and the

desired called party is at an unknown location, the person who picked up the call

may park the call and then use the public address system to page the desired

called party to pick up the call.

 During a conversation, a person may need to go to another office for some

reason (for example, to retrieve an important file); parking the call allows this

person to continue the conversation after arriving at the other office.

Yeastar Technology MyPBX Standard Administrator's Guide

Other manuals for Yeastar Technology MyPBX Standard